Adhesives A-5600 & A-5750 Evans-Rotork Laminator Substrate Conditions: Board should be smooth, free from surface irregularities, sanded if necessary and then vacuumed to remove dust from the surface to be laminated. Board should not be laminated if temperature of surface is below 65° F. Preheating of boards is recommended for best results during cold weather. Surface Temperature of Steel Rollers: 355 - 375° F Note: Laminating temperatures are a function of several factors: basis weight of paper, speed of lamination, board temperature, etc. and should be determined by the operator for varying conditions. ROLL TEMPERATURE SHOULD BE VERIFIED WITH A PYROMETER. Surface Temperature of Rubber Rollers: 225 - 275° F Pressure: 90-100 lb Speed: 20 - 40 FPM Lamp Setting: 50 - 80% Distance From Web: 3 - 8 inches Paper: 23 to 30 gram

Our service engineers are available to help purchasers obtain best results from our products, and recommendations are based on tests and information believed to be reliable. However, since we have no control over the conditions under which our products are transported to, stored, handled, or used by purchasers, all recommendations are made on condition that we will not be held liable for any damages resulting from their use. No representative of ours has any authority to waive or change this provision.

BACK TO APPLICATION GUIDELINES |  AACC HOME